INSTRUCTION:
1. Clean out any loose glass particles of the break using a push pin if necessary. Thoroughly remove oil and dirty from screen surface with provided cleaning cloth. Make sure the screen dry before applying the glue.

 

 

 

 

2. Covering the buttons of handsets with the provided mask tap to avoid the liquid glue flow into buttons.

 

 

 

 

3. Slowly squeeze a few drops of screen repair glue on the break area, Using the scraper to thin out the glue and push it into the crack, make the liquid glue fully into the gap, repeat this step again until the liquid glue have been into the gap completely, then stay 5-10 mins.
Liquid glue is used to seal cracks and sharp edges, restore connectivity, and stop glass shards from splintering, cutting your fingers.

 

 

 

 

4. Place the clear curing film over the repair area when the screen surface still wet, rubbing lightly over clear film to make it smooth, let the screen under the sunshine stay 15-20 mins, to make the repair glue fully cured.

 

 

 

 

5. Remove the curing film, put the fabric on the break area, drop the release agent on the fabric to get it soaked.

 

 

 

 

6. Stay 4-5 mins to let the extra glue on screen get dissolved by the release agent and remove it with the fabric. Then clean it thoroughly with the alcohol prep pad and remove the mask tape.

 

 

 

 

It will be better if you stick a new screen protector!
Now step back and admire your work. You know you have done a good job when you can’t even find the old chip on the screen. If you have any questions, just leave us a message or write email to us, we will give the satisfied reply, while you problem solved don’t forget write a review and feedback to us, thanks.